Product Overview
Prepainted steel sheet is prepainted coil that has been levelled and cut into flat sheets. It provides the same coloured, coated steel in a ready-to-use plate form for wall panels, cladding and general fabrication.
Grades and Standards
| Grade | Standard | Notes |
| TDC51D+Z, TDC51D+AZ | GB/T 12754, EN 10169 | Prepainted on galvanized or galvalume substrate |
| TS250GD to TS550GD+Z, +AZ | EN 10169 | Structural prepainted grades |
| CGCC | JIS G3312 | Japanese prepainted galvanized grade |
Available Dimensions
Thickness 0.38 to 1.2 mm; width up to 1285 mm; paint film 5 plus 15 microns or 6 to 7 microns; supplied as cut-to-length flat sheet in RAL or custom colours.
Key Features
- Flat cut sheet produced from the same prepainted coil quality.
- Consistent colour and coating across the batch.
- Ready for cladding, profiling and fabrication.
- UV-resistant exterior grade coatings available.
Applications
- Wall and roof panels.
- Cladding and partitions.
- General fabrication and trim.
Delivery, Testing and Quality
Cold rolled and coated products are produced by Hebei Jingye High-Quality Steel Technology on a 1450 mm line. The project totals 2.6 million tonnes of annual capacity across two phases and includes a pickling tandem mill, continuous annealing and batch annealing lines, three hot-dip galvanising lines, a hot-dip aluminium-zinc line and colour coating lines. Products are manufactured under ISO 9001 and ISO 14001.
Frequently Asked Questions
What is the difference between PPGI sheet and PPGI coil?
PPGI sheet is the cut flat form and PPGI coil is the roll. They are the same prepainted steel in different product forms.
Can you supply colour-matched sheets for an ongoing project?
Yes. Colour consistency is controlled batch to batch, and colour samples can be retained for repeat orders.
